Skip to content
Typerise

Typing Accuracy Calculator

Find out how accurately you type. Enter your total character attempts and mistakes to calculate your accuracy percentage, error rate and correct input count.

Enter Your Typing Results

First pick what your mistake count includes.

Counts every wrong key you pressed, even if you fixed it. Most typing tests, including ours, use this.

Every letter, number, space and punctuation mark typed. Not Backspace or Shift.

Wrong characters typed, including ones you later fixed with Backspace.

Your Typing Accuracy

Enter your typing attempts to calculate accuracy.

Typing accuracy

—

Error rate
—
Correct
—
Incorrect
—
Errors per 100
—
Errors per minute
—
Adjusted WPM (est.)
—
WPM lost to errors
—

How to Use the Typing Accuracy Calculator

  1. 1

    Choose what your mistake count includes: every wrong key you pressed (keystroke attempts), or only mistakes left in the finished text (final text).

  2. 2

    Enter your total and the number of mistakes, using numbers from the same test.

  3. 3

    Optionally open speed analysis and add the test length and your gross WPM or CPM.

  4. 4

    Read your accuracy, error rate and correct count, then copy the result or set an accuracy goal.

How Is Typing Accuracy Calculated?

A simple keystroke-based accuracy formula compares the number of correct character attempts with the total number of printable character attempts.

For example, if 1,000 printable characters were attempted and 40 attempts were incorrect, accuracy is 96% and the error rate is 4%. This method counts wrong attempts even if they were later corrected. Other typing tests may calculate accuracy from the final text instead, so check the scoring rules before comparing results.

  • Correct = Total − Incorrect
  • Accuracy = Correct ÷ Total × 100
  • Error rate = Incorrect ÷ Total × 100
  • Accuracy + Error rate = 100%

Worked Example: 1,000 Attempts, 40 Mistakes

MetricCalculationResult
Correct attempts1,000 − 40960
Accuracy960 ÷ 1,000 × 10096.0%
Error rate40 ÷ 1,000 × 1004.0%
Errors per 10040 ÷ 1,000 × 1004
Errors per minute40 ÷ 5 min8
Adjusted WPM (est.)60 × 0.9657.6

The last two rows assume a 5-minute test at 60 gross WPM. Load it with Use an example in the calculator.

What Counts as a Typing Error?

Decide this before you calculate, because tests don't all agree. Common cases:

MistakeExampleDoes it count?
Wrong letterTyping "teh" for "the"Always an error.
Wrong capital"monday" for "Monday"Usually an error. Capitals are separate characters.
Wrong or missing punctuationA missing comma or full stopAn error when punctuation is part of the text.
Extra or missing space"to day" or "todaythe"An error when spaces are counted, which they usually are.
Fixed with BackspaceTyping "x", deleting it, typing "s"Counts in attempt-based scores, not in final-text scores.
Wrong word"their" for "there"Some exams count whole words. Don't mix word and character counts.

Do Corrected Typing Mistakes Count?

It depends on the scoring method. An attempt-based score counts a wrong character when it's first typed, even if you later press Backspace and correct it. A final-text score checks the text that remains after editing and may not count a corrected mistake.

These methods answer different questions: one measures keystroke accuracy, the other measures the accuracy of the finished text. Keystroke accuracy is almost always the lower of the two, and it's the one that shows how much time you spend fixing mistakes.

You type 200 characters. 10 are wrong when you type them; you fix 8 and leave 2.
Attempt-based
95.0%
190 ÷ 200
Final text
99.0%
198 ÷ 200

Typing Accuracy vs. Typing Speed

Typing speed tells you how quickly you produce text. Accuracy tells you how often your input matches what you meant to type. A high speed with frequent errors may not be useful for work that needs reliable text, and every fix costs time: the wrong key, Backspace and the right key.

The calculator's speed analysis multiplies gross speed by accuracy for a quick estimate of what errors cost you. It's a simplification. Real tests calculate net speed in different ways: from correct characters only, with a penalty per uncorrected error, or by counting wrong words. Use your test's own formula when it matters.

Want net speed with a specific scoring rule? Use the WPM calculator or the CPM calculator.

Set an Accuracy Goal

Pick a target and see how many mistakes you can make. With 500 attempts and a 98% goal, you can make up to 10 mistakes. Add your own mistake count to check whether you met it.

%

Most mistakes allowed

10

Most mistakes = total × (100% − target), rounded down. It's your own goal, not a pass mark for any job or exam.

How to Improve Your Typing Accuracy

  • Slow down to speed up

    Practise at a pace where you consistently hit the right keys. Speed comes back once the movements are reliable.

  • Review your mistakes

    Notice which mistakes repeat instead of retyping the same passage without looking at what went wrong.

  • Isolate the hard parts

    Practise tricky letter pairs, capitals, punctuation and numbers on their own.

  • Keep a steady position

    Return to the home row and keep your hands relaxed. Tension and drifting fingers cause slips.

  • Raise speed gradually

    Push the pace only once your accuracy is stable, and back off when it drops.

  • Compare fairly

    Compare tests with similar text and the same scoring method. A score on easy text isn't progress on hard text.

More Typing Tools

Typing Accuracy FAQs

Formulas

What is typing accuracy?

Typing accuracy is the percentage of your typing input that is correct. The exact result depends on whether the test measures individual keystroke attempts, characters in the final text, or word-level errors.

How do I calculate typing accuracy?

For an attempt-based calculation, subtract incorrect character attempts from total attempts, divide the correct attempts by the total, and multiply by 100. For example, 500 characters with 10 mistakes is 490 ÷ 500 × 100 = 98%.

What is the typing accuracy formula?

Accuracy = (Total Attempts − Incorrect Attempts) ÷ Total Attempts × 100. It's only comparable with results that use the same counting rules.

Is error rate the same as typing accuracy?

They're two sides of the same number when they use the same total and error definition. Error rate = Incorrect ÷ Total × 100, and accuracy = 100% − error rate.

What are errors per 100 keystrokes?

The number of mistakes in every 100 attempts. With an attempt-based formula it's the same number as the error rate, just phrased differently: a 4% error rate means 4 errors per 100 keystrokes.

Can I calculate accuracy from words instead of keystrokes?

Only if you know the total words and the number of incorrect words, and your scoring method is word-based. Don't mix word errors with character or keystroke counts. Entering wrong words against a character total gives a misleading result.

What counts

Do corrected mistakes count?

They count in an attempt-based keystroke accuracy score, because the wrong key was pressed. A final-text accuracy method may ignore a mistake you fixed before finishing. Pick the matching option in the calculator.

Does typing accuracy include spaces and punctuation?

It depends on the test rules. If spaces and punctuation are part of the text, count them consistently in both the total and the mistakes. Most typing tests do include them.

Why is my accuracy different on two typing websites?

One may count every wrong keystroke while the other checks only the final text, and they may treat capitals, extra spaces or skipped words differently. The same typing can easily score 95% on one and 99% on the other.

Your result

What is a good typing accuracy percentage?

There's no universal score that applies to every task or exam. Requirements depend on the job, test rules, language and how costly mistakes are. Use the official requirement when you prepare for a specific assessment, and set your own goal for practice.

Is 95% typing accuracy good?

It can be a useful practice result: 5 mistakes in every 100 keystrokes. Whether it's enough depends on the task. A data-entry or transcription assessment may ask for more than casual typing does.

How does accuracy affect WPM?

Errors reduce the amount of correct text you produce, and fixing them takes time. Different typing tests use different net-speed formulas, so use the formula from the test you're comparing against.

Can I calculate net WPM from accuracy?

You can make a simple estimate by multiplying gross WPM by your accuracy, which the speed analysis does. It isn't a universal official net WPM formula: some tests count only correct characters or apply their own error penalty. Our WPM calculator shows those methods.

Can this calculator tell me if I passed a typing exam?

It calculates accuracy from the numbers and method you enter. To know whether you passed, compare the result with the official rules for your exam, which may count errors differently.

Does the calculator save what I enter?

No. Everything is calculated in your browser and nothing is sent or stored. Refreshing the page clears it.