Skip to content
Typerise

WPM Calculator

Calculate Your Typing Speed in WPM

Enter the number of characters you typed and how long it took. Our WPM calculator works out your gross WPM, net WPM, CPM and typing accuracy, and shows every step of the math.

Typing Speed Calculator

Already took a typing test? Enter your numbers below.

Include spaces and punctuation, the way most typing tests count them.

Time taken

Minutes and seconds, for example 2 min 30 sec. A 45-second test is 0 min 45 sec.

Subtracts each incorrect character, then divides by 5. Also gives you accuracy.

Mistakes left in the final text, counted in characters. Not typos you fixed. Leave empty if you don't know.

Total keystrokes (optional, for real KPH)

Only if your test reports every key press, including Backspace and Shift. Otherwise we show an estimate.

Don't know your character count? Paste your text

Characters: 0 · Without spaces: 0 · Words: 0

The count includes spaces, punctuation and line breaks. It can't tell which characters were mistakes, and you still need the time. Your text is counted in your browser and never sent anywhere.

Your Typing Speed Results

Enter your typing data to see your results.

Gross WPM
—Raw speed before errors are deducted.
Net WPM
—Speed after the selected error rule.
Accuracy
—Correct characters out of all counted characters.
CPM
—Characters entered per minute.
Correct CPM
—
Standard words
—
Errors / min
—
Est. KPH
—

How to Use the WPM Calculator

  1. 1

    Enter the total number of characters you typed. Include spaces and punctuation if your original test counted them. If you only have the text, paste it into the counter and we'll count it for you.

  2. 2

    Enter the time you spent typing, using both minutes and seconds.

  3. 3

    Add the number of uncorrected incorrect characters if you know it. That lets the calculator work out net WPM and accuracy with the character-based method. If you don't know it, leave it empty: you'll still get gross WPM and CPM.

  4. 4

    Read your results, open the calculation to check the math, or copy your score.

How Is WPM Calculated?

Typing speed is usually measured in words per minute (WPM). In most typing tests, one standard word is five characters, including spaces and punctuation. That makes results comparable between passages with long words and passages with short ones.

To calculate gross WPM, divide the total number of characters by five, then divide that by the time spent typing in minutes. Time is converted to minutes first, so 2 minutes 30 seconds becomes 2.5 minutes, not 2 or 3.

  • Gross WPM = (Characters ÷ 5) ÷ Minutes
  • Net WPM = ((Characters − Incorrect) ÷ 5) ÷ Minutes
  • Accuracy = (Correct ÷ Characters) × 100
  • CPM = Characters ÷ Minutes

Worked Example: 1,500 Characters in 5 Minutes

Worked example: 1,500 characters in 5 minutes with 20 incorrect characters. Load it into the calculator with Try an example to see the same numbers.

MetricCalculationResult
Standard words1,500 ÷ 5300
Gross WPM300 ÷ 5 min60.0
Correct characters1,500 − 201,480
Net WPM(1,480 ÷ 5) ÷ 5 min59.2
Accuracy1,480 ÷ 1,500 × 10098.7%
CPM1,500 ÷ 5 min300
Correct CPM1,480 ÷ 5 min296
Estimated KPH300 × 6018,000

Gross WPM vs. Net WPM: What's the Difference?

Gross WPM measures your raw typing speed before errors are deducted. Net WPM adjusts that result using an error-scoring rule.

There is no single error rule used by every typing platform. Some calculate net speed from correctly typed characters, others take a separate penalty off for each uncorrected error. That's why this calculator lets you pick a method.

AspectGross WPMNet WPM
What it measuresRaw typing speedSpeed after the selected error rule
MistakesNot deductedUncorrected mistakes lower it
Useful forSeeing how fast your fingers moveSeeing your effective, usable speed
Needs an error countNoYes

The three calculation methods

  • Correct-character method (default)

    Subtracts incorrect characters from the total, then divides by five and by the minutes. It's easy to check and also gives you accuracy. Enter errors as characters.

    Net WPM = ((Characters − Incorrect) ÷ 5) ÷ Minutes

  • Error-penalty method

    Some tests take a fixed penalty off gross WPM for every uncorrected error unit, such as one wrong word. Use this only when your test defines errors that way. Accuracy isn't calculated, because an error unit isn't a character.

    Net WPM = Gross WPM − (Error units ÷ Minutes)

  • Gross WPM only

    Just your raw speed and CPM. Pick this when you don't have, or don't need, an error count.

    Gross WPM = (Characters ÷ 5) ÷ Minutes

How Is Typing Accuracy Calculated?

With the character-based method, typing accuracy is the percentage of counted characters you entered correctly. Subtract the incorrect characters from the total, divide by the total, and multiply by 100.

For example, 500 characters with 10 incorrect is 490 ÷ 500 × 100 = 98.0%. For 98% accuracy you can leave at most 2 wrong characters in every 100.

The error count has to be in the same unit as the total. Ten wrong words is not the same as ten wrong characters, so don't mix them. And if you leave the error count empty, we show accuracy as unavailable rather than assuming 100%.

Accuracy = (Correct Characters ÷ Total Characters) × 100

Some typing tests, including ours, measure accuracy from keystrokes, so a typo you fixed with Backspace still counts. A calculator only sees final numbers, so it uses characters.

Why Does One Typing-Test Word Equal Five Characters?

Real words vary a lot in length. "I am on it" is four words and "unquestionably" is one, yet the single long word takes more typing. Counting every five characters as one standard word makes typing-speed results fair to compare across different passages.

Spaces and punctuation are counted as characters too, because you have to type them. Here's a sentence split into standard words:

  1. Typin
  2. g·tes
  3. ts·co
  4. unt·f
  5. ive·c
  6. harac
  7. ters·
  8. as·on
  9. e·wor
  10. d.
47 characters (· marks a space) ÷ 5 = 9.4 standard words, even though it has 8 dictionary words.

So the word count in Microsoft Word or Google Docs isn't the same as typing-test words. If you only know a document's word count, use the paste box in the calculator to get the character count instead.

Why Are My WPM Results Different on Another Website?

Typing tests don't all use identical scoring rules, so the same typing can give different numbers. Common reasons:

  • One site shows gross WPM and another shows net WPM.
  • One counts correct characters, another takes a penalty per error.
  • Spaces, punctuation or line breaks are counted differently.
  • Corrected mistakes count on one test and not on another.
  • The clock starts or stops at a different moment, or an unfinished last word is handled differently.
  • Results are rounded down, rounded to the nearest number, or shown with decimals.

This calculator always shows which method it used, so you can match it to the test you're comparing against. It can't promise to reproduce any other platform's exact score.

Convert WPM to CPM

With the standard five-character word, multiply WPM by five to get characters per minute. To convert CPM to standard WPM, divide by five.

Characters per second
5
Estimated KPH
18,000

CPM = WPM × 5. Estimated KPH = CPM × 60 and assumes one key press per character, so real keystroke counts (Shift, Backspace) will be higher.

Only need characters per minute? Use the CPM calculator, or measure it directly with the CPM typing test.

Common WPM to CPM conversions
WPMCPMEst. KPH
301509,000
4020012,000
5025015,000
6030018,000
7035021,000
8040024,000
10050030,000

Want to Test Your Typing Speed?

A calculator works with results you already have. To measure your current speed, take an online typing test and see how fast and accurately you type, right now.

WPM Calculator FAQ

Using the calculator

What is a WPM calculator?

A WPM calculator works out your typing speed in words per minute from numbers you already have. Enter the characters you typed and the time it took to get gross WPM. Add the number of uncorrected errors and it also works out net WPM and accuracy using the method you pick.

Can I calculate WPM for a 30-second test?

Yes. Enter 0 minutes and 30 seconds. The calculator converts the total time into minutes (0.5) before calculating, so 300 characters in 30 seconds is 120 gross WPM.

What if I don't know how many mistakes I made?

Leave the error box empty. You'll still get gross WPM and CPM. Net WPM and accuracy need an error count, so they stay blank instead of pretending you made no mistakes. Check your original test's results page for the error count.

Can I calculate WPM from words instead of characters?

Yes, if your number is in standard five-character words. Switch to the Standard words tab. A normal word count from a word processor won't match, because real words vary in length. Paste the text into the character counter instead.

Can I use this calculator for a job typing test?

You can use it to understand or estimate your speed from the numbers you have. Employers and exam providers often use their own scoring rules, so always go by the instructions and official result of the specific test.

Does this calculator save my data?

No. All calculations run in your browser. The numbers you enter and any text you paste aren't sent to our server or saved anywhere, so refreshing the page clears them.

Formulas and scoring

How do you calculate WPM?

Divide the total number of characters by five, then divide by the time in minutes: WPM = (Characters ÷ 5) ÷ Minutes. For example, 1,500 characters in 5 minutes is 300 standard words ÷ 5 = 60 WPM.

What is gross WPM?

Gross WPM is your raw typing speed before errors are deducted: (Total characters ÷ 5) ÷ Time in minutes.

What is net WPM?

Net WPM is your typing speed adjusted for errors. The exact formula depends on the test's scoring rules. Our default subtracts incorrect characters before dividing by five; the error-penalty option takes errors per minute off gross WPM instead.

Why is my net WPM lower than my gross WPM?

Because net WPM removes the uncorrected mistakes. With no errors the two numbers are the same. The more errors you leave in, the bigger the gap.

How do I calculate typing accuracy?

Divide the number of correct characters by the total number of characters, then multiply by 100. For example, 1,480 correct out of 1,500 is 98.7%.

Do spaces count when calculating WPM?

In most typing tests, yes. Spaces are included in the character count because the five-character standard word includes them. Counting rules can vary, so use the same method as the test you're comparing against.

Does punctuation count toward typing speed?

Most character-based typing tests count each punctuation mark as a character. If your original test reports a character count, use that number as it is.

Do corrected mistakes count as errors?

It depends on the test. Some score only mistakes left in the final text; others track every wrong keystroke, even ones you fixed. For the correct-character method here, enter the mistakes that were left uncorrected.

Units and conversions

What is CPM?

CPM means characters per minute: how many characters you enter in one minute. Under the five-character convention, divide CPM by five to get standard WPM.

How do I convert WPM to CPM?

Multiply WPM by five. 60 WPM is 300 characters per minute, and 300 CPM is 60 WPM.

What is KPH?

KPH means keystrokes per hour. If your test reports total keystrokes, enter them and the calculator shows real KPH. Otherwise it shows an estimate (CPM × 60), which assumes one key press per character and so leaves out Shift, Backspace and other extra keys.

Understanding your result

Why is my WPM different on another website?

Platforms use different formulas, count characters differently, handle corrections differently, and round results differently. One site may show gross WPM while another shows net WPM.

Why does the calculator show decimals?

Real typing rarely lands on a whole number, so we show one decimal place and keep full precision in the calculation. Some tests round down to a whole number, which can make their score look slightly lower.

Is a higher WPM always better?

Not on its own. Speed is only part of typing skill. Accuracy, consistency, the text you typed and the scoring method matter too. A fast score with lots of errors usually isn't useful at work.

Is this an official typing-test score?

No. It calculates results from the numbers and method you provide. A school, employer, certification provider or typing-test platform may use a different formula.

Can I take a typing test after using the calculator?

Yes. Use the 1, 3, 5 or 10 minute typing tests on this site to measure your speed directly. Each shows net WPM, raw WPM and accuracy when time is up.

Know your numbers? Now test your skills. Take a free typing test and measure your speed in real time.

Take a Free Typing Test